New Jersey

Department of Transportation

Standard Specifications

for Road and Bridge Construction

2007


NJDOT ST Statistical Tables


Table ST-1 Estimation of Lot Percent Defective for Sample Size 11

Q2

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 48.98 47.96 46.94 45.92 44.90 43.88 42.86 41.84 40.82

0.1

39.80 38.78 37.76 36.73 35.71 34.69 33.67 32.65 31.63 30.61

0.2

29.59 28.57 27.55 26.53 25.51 24.49 23.47 22.45 21.43 20.41

0.3

19.39 18.37 17.35 16.33 15.31 14.29 13.27 12.24 11.22 10.20

0.4

9.18 8.16 7.14 6.12 5.10 4.08 3.06 2.04 1.02 0.00
1 This empirically derived table for a sample size of 1 is suitable only for use in the concrete strength analysis in 903.03.
2 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-2 Estimation of Lot Percent Defective for Sample Size 21

Q2

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.66 49.33 48.99 48.66 48.32 47.99 47.65 47.32 46.98

0.1

46.64 46.31 45.97 45.64 45.30 44.97 44.63 44.30 43.96 43.62

0.2

43.29 42.95 42.62 42.28 41.95 41.61 41.28 40.94 40.60 40.27

0.3

39.93 39.60 39.26 38.93 38.59 38.26 37.92 37.58 37.25 36.91

0.4

36.58 36.24 35.91 35.57 35.23 34.90 34.56 34.23 33.89 33.56

0.5

33.22 32.89 32.55 32.21 31.88 31.54 31.21 30.87 30.54 30.20

0.6

29.87 29.53 29.19 28.86 28.52 28.19 27.85 27.52 27.18 26.85

0.7

26.51 26.17 25.84 25.50 25.17 24.83 24.50 24.16 23.83 23.49

0.8

23.15 22.82 22.48 22.15 21.81 21.48 21.14 20.81 20.47 20.13

0.9

19.80 19.46 19.13 18.79 18.46 18.12 17.79 17.45 17.11 16.78

1.0

16.44 16.11 15.77 15.44 15.10 14.77 14.43 14.09 13.76 13.42

1.1

13.09 12.75 12.42 12.08 11.75 11.41 11.07 10.74 10.40 10.07

1.2

9.73 9.40 9.06 8.72 8.39 8.05 7.72 7.38 7.05 6.71

1.3

6.38 6.04 5.70 5.37 5.03 4.70 4.36 4.03 3.69 3.36

1.4

3.02 2.68 2.35 2.01 1.68 1.34 1.01 0.67 0.34 0.00
1 This empirically derived table for a sample size of 2 is suitable only for use in the concrete strength analysis in 903.03.
2 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-3 Estimation of Lot Percent Defective for Sample Size 3

Q1

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.72 49.45 49.17 48.90 48.62 48.35 48.07 47.79 47.52

0.1

47.24 46.96 46.69 46.41 46.13 45.85 45.58 45.30 45.02 44.74

0.2

44.46 44.18 43.90 43.62 43.34 43.05 42.77 42.49 42.20 41.92

0.3

41.63 41.35 41.06 40.77 40.49 40.20 39.91 39.62 39.33 39.03

0.4

38.74 38.45 38.15 37.85 37.56 37.26 36.96 36.66 36.35 36.05

0.5

35.75 35.44 35.13 34.82 34.51 34.20 33.88 33.57 33.25 32.93

0.6

32.61 32.28 31.96 31.63 31.30 30.97 30.63 30.30 29.96 29.61

0.7

29.27 28.92 28.57 28.22 27.86 27.50 27.13 26.76 26.39 26.02

0.8

25.64 25.25 24.86 24.47 24.07 23.67 23.26 22.84 22.42 21.99

0.9

21.55 21.11 20.66 20.19 19.73 19.25 18.75 18.25 17.74 17.21

1.0

16.67 16.11 15.53 14.93 14.31 13.66 12.98 12.27 11.51 10.71

1.1

9.84 8.89 7.82 6.60 5.08 2.87 0.00 0.00 0.00 0.00
1 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-4 Estimation of Lot Percent Defective for Sample Size 4

Q1

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.67 49.33 49.00 48.67 48.33 48.00 47.67 47.33 47.00

0.1

46.67 46.33 46.00 45.67 45.33 45.00 44.67 44.33 44.00 43.67

0.2

43.33 43.00 42.67 42.33 42.00 41.67 41.33 41.00 40.67 40.33

0.3

40.00 39.67 39.33 39.00 38.67 38.33 38.00 37.67 37.33 37.00

0.4

36.67 36.33 36.00 35.67 35.33 35.00 34.67 34.33 34.00 33.67

0.5

33.33 33.00 32.67 32.33 32.00 31.67 31.33 31.00 30.67 30.33

0.6

30.00 29.67 29.33 29.00 28.67 28.33 28.00 27.67 27.33 27.00

0.7

26.67 26.33 26.00 25.67 25.33 25.00 24.67 24.33 24.00 23.67

0.8

23.33 23.00 22.67 22.33 22.00 21.67 21.33 21.00 20.67 20.33

0.9

20.00 19.67 19.33 19.00 18.67 18.33 18.00 17.67 17.33 17.00

1.0

16.67 16.33 16.00 15.67 15.33 15.00 14.67 14.33 14.00 13.67

1.1

13.33 13.00 12.67 12.33 12.00 11.67 11.33 11.00 10.67 10.33

1.2

10.00 9.67 9.33 9.00 8.67 8.33 8.00 7.67 7.33 7.00

1.3

6.67 6.33 6.00 5.67 5.33 5.00 4.67 4.33 4.00 3.67

1.4

3.33 3.00 2.67 2.33 2.00 1.67 1.33 1.00 0.67 0.33

1.5

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
1 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-5 Estimation of Lot Percent Defective for Sample Size 5

Q1

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.64 49.29 48.93 48.58 48.22 47.86 47.51 47.15 46.80

0.1

46.44 46.09 45.73 45.38 45.02 44.67 44.31 43.96 43.60 43.25

0.2

42.90 42.54 42.19 41.84 41.48 41.13 40.78 40.43 40.08 39.72

0.3

39.37 39.02 38.67 38.32 37.97 37.62 37.28 36.93 36.58 36.23

0.4

35.88 35.54 35.19 34.85 34.50 34.16 33.81 33.47 33.12 32.78

0.5

32.44 32.10 31.76 31.42 31.08 30.74 30.40 30.06 29.73 29.39

0.6

29.05 28.72 28.39 28.05 27.72 27.39 27.06 26.73 26.40 26.07

0.7

25.74 25.41 25.09 24.76 24.44 24.11 23.79 23.47 23.15 22.83

0.8

22.51 22.19 21.87 21.56 21.24 20.93 20.62 20.31 20.00 19.69

0.9

19.38 19.07 18.77 18.46 18.16 17.86 17.55 17.25 16.96 16.66

1.0

16.36 16.07 15.78 15.48 15.19 14.91 14.62 14.33 14.05 13.76

1.1

13.48 13.20 12.93 12.65 12.37 12.10 11.83 11.56 11.29 11.02

1.2

10.76 10.50 10.23 9.97 9.72 9.46 9.21 8.96 8.71 8.46

1.3

8.21 7.97 7.73 7.49 7.25 7.02 6.79 6.56 6.33 6.10

1.4

5.88 5.66 5.44 5.23 5.02 4.81 4.60 4.39 4.19 3.99

1.5

3.80 3.61 3.42 3.23 3.05 2.87 2.69 2.52 2.35 2.19

1.6

2.03 1.87 1.72 1.57 1.42 1.28 1.15 1.02 0.89 0.77

1.7

0.66 0.55 0.45 0.36 0.27 0.19 0.12 0.06 0.02 0.00
1 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-6 Estimation of Lot Percent Defective for Sample Size 6

Q1

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.63 49.27 48.90 48.53 48.16 47.80 47.43 47.06 46.70

0.1

46.33 45.96 45.60 45.23 44.86 44.50 44.13 43.77 43.40 43.04

0.2

42.68 42.31 41.95 41.59 41.22 40.86 40.50 40.14 39.78 39.42

0.3

39.06 38.70 38.34 37.98 37.62 37.27 36.91 36.55 36.20 35.84

0.4

35.49 35.14 34.79 34.43 34.08 33.73 33.38 33.04 32.69 32.34

0.5

32.00 31.65 31.31 30.96 30.62 30.28 29.94 29.60 29.26 28.93

0.6

28.59 28.25 27.92 27.59 27.26 26.92 26.60 26.27 25.94 25.61

0.7

25.29 24.96 24.64 24.32 24.00 23.68 23.37 23.05 22.74 22.42

0.8

22.11 21.80 21.49 21.18 20.88 20.57 20.27 19.97 19.67 19.37

0.9

19.07 18.78 18.49 18.19 17.90 17.61 17.33 17.04 16.76 16.48

1.0

16.20 15.92 15.64 15.37 15.09 14.82 14.55 14.29 14.02 13.76

1.1

13.50 13.24 12.98 12.72 12.47 12.22 11.97 11.72 11.47 11.23

1.2

10.99 10.75 10.51 10.28 10.04 9.81 9.58 9.36 9.13 8.91

1.3

8.69 8.48 8.26 8.05 7.84 7.63 7.42 7.22 7.02 6.82

1.4

6.63 6.43 6.24 6.05 5.87 5.68 5.50 5.33 5.15 4.98

1.5

4.81 4.64 4.47 4.31 4.15 4.00 3.84 3.69 3.54 3.40

1.6

3.25 3.11 2.97 2.84 2.71 2.58 2.45 2.33 2.21 2.09

1.7

1.98 1.87 1.76 1.66 1.55 1.45 1.36 1.27 1.18 1.09

1.8

1.01 0.93 0.85 0.78 0.71 0.64 0.57 0.51 0.46 0.40

1.9

0.35 0.30 0.26 0.22 0.18 0.15 0.12 0.09 0.07 0.05

2.0

0.03 0.02 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00
1 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-7 Estimation of Lot Percent Defective for Sample Size 7

Q1

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.63 49.25 48.88 48.50 48.13 47.75 47.38 47.01 46.63

0.1

46.26 45.89 45.51 45.14 44.77 44.40 44.03 43.65 43.28 42.91

0.2

42.54 42.17 41.80 41.44 41.07 40.70 40.33 39.97 39.60 39.23

0.3

38.87 38.50 38.14 37.78 37.42 37.05 36.69 36.33 35.98 35.62

0.4

35.26 34.90 34.55 34.19 33.84 33.49 33.13 32.78 32.43 32.08

0.5

31.74 31.39 31.04 30.70 30.36 30.01 29.67 29.33 28.99 28.66

0.6

28.32 27.98 27.65 27.32 26.99 26.66 26.33 26.00 25.68 25.35

0.7

25.03 24.71 24.39 24.07 23.75 23.44 23.12 22.81 22.50 22.19

0.8

21.88 21.58 21.27 20.97 20.67 20.37 20.07 19.78 19.48 19.19

0.9

18.90 18.61 18.33 18.04 17.76 17.48 17.20 16.92 16.65 16.37

1.0

16.10 15.83 15.56 15.30 15.03 14.77 14.51 14.26 14.00 13.75

1.1

13.49 13.25 13.00 12.75 12.51 12.27 12.03 11.79 11.56 11.33

1.2

11.10 10.87 10.65 10.42 10.20 9.98 9.77 9.55 9.34 9.13

1.3

8.93 8.72 8.52 8.32 8.12 7.92 7.73 7.54 7.35 7.17

1.4

6.98 6.80 6.62 6.45 6.27 6.10 5.93 5.77 5.60 5.44

1.5

5.28 5.13 4.97 4.82 4.67 4.52 4.38 4.24 4.10 3.96

1.6

3.83 3.69 3.57 3.44 3.31 3.19 3.07 2.95 2.84 2.73

1.7

2.62 2.51 2.41 2.30 2.20 2.11 2.01 1.92 1.83 1.74

1.8

1.65 1.57 1.49 1.41 1.34 1.26 1.19 1.12 1.06 0.99

1.9

0.93 0.87 0.81 0.76 0.70 0.65 0.60 0.56 0.51 0.47

2.0

0.43 0.39 0.36 0.32 0.29 0.26 0.23 0.21 0.18 0.16

2.1

0.14 0.12 0.10 0.08 0.07 0.06 0.05 0.04 0.03 0.02

2.2

0.01 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00
1 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-8 Estimation of Lot Percent Defective for Sample Size 8

Q1

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.62 49.24 48.86 48.49 48.11 47.73 47.35 46.97 46.59

0.1

46.22 45.84 45.46 45.08 44.71 44.33 43.96 43.58 43.21 42.83

0.2

42.46 42.08 41.71 41.34 40.97 40.59 40.22 39.85 39.48 39.11

0.3

38.75 38.38 38.01 37.65 37.28 36.92 36.55 36.19 35.83 35.47

0.4

35.11 34.75 34.39 34.04 33.68 33.33 32.97 32.62 32.27 31.92

0.5

31.57 31.22 30.87 30.53 30.18 29.84 29.50 29.16 28.82 28.48

0.6

28.15 27.81 27.48 27.15 26.82 26.49 26.16 25.83 25.51 25.19

0.7

24.86 24.54 24.23 23.91 23.59 23.28 22.97 22.66 22.35 22.04

0.8

21.74 21.44 21.14 20.84 20.54 20.24 19.95 19.66 19.37 19.08

0.9

18.79 18.51 18.23 17.95 17.67 17.39 17.12 16.85 16.57 16.31

1.0

16.04 15.78 15.51 15.25 15.00 14.74 14.49 14.24 13.99 13.74

1.1

13.49 13.25 13.01 12.77 12.54 12.30 12.07 11.84 11.61 11.39

1.2

11.17 10.94 10.73 10.51 10.30 10.09 9.88 9.67 9.47 9.26

1.3

9.06 8.87 8.67 8.48 8.29 8.10 7.91 7.73 7.55 7.37

1.4

7.19 7.02 6.85 6.68 6.51 6.35 6.19 6.03 5.87 5.71

1.5

5.56 5.41 5.26 5.12 4.97 4.83 4.69 4.56 4.42 4.29

1.6

4.16 4.03 3.91 3.79 3.67 3.55 3.43 3.32 3.21 3.10

1.7

2.99 2.89 2.79 2.69 2.59 2.49 2.40 2.31 2.22 2.13

1.8

2.04 1.96 1.88 1.80 1.72 1.65 1.58 1.51 1.44 1.37

1.9

1.31 1.24 1.18 1.12 1.07 1.01 0.96 0.91 0.86 0.81

2.0

0.76 0.72 0.67 0.63 0.59 0.55 0.52 0.48 0.45 0.42

2.1

0.39 0.36 0.33 0.30 0.28 0.26 0.23 0.21 0.19 0.17

2.2

0.16 0.14 0.13 0.11 0.10 0.09 0.08 0.07 0.06 0.05

2.3

0.04 0.04 0.03 0.02 0.02 0.02 0.01 0.01 0.01 0.00
1 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-9 Estimation of Lot Percent Defective for Sample Size 9

Q1

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.62 49.24 48.85 48.47 48.09 47.71 47.33 46.95 46.57

0.1

46.18 45.80 45.42 45.04 44.66 44.29 43.91 43.53 43.15 42.77

0.2

42.40 42.02 41.64 41.27 40.89 40.52 40.15 39.77 39.40 39.03

0.3

38.66 38.29 37.92 37.55 37.19 36.82 36.46 36.09 35.73 35.37

0.4

35.00 34.64 34.29 33.93 33.57 33.21 32.86 32.51 32.15 31.80

0.5

31.45 31.10 30.76 30.41 30.07 29.72 29.38 29.04 28.70 28.36

0.6

28.03 27.69 27.36 27.03 26.70 26.37 26.04 25.72 25.39 25.07

0.7

24.75 24.43 24.11 23.80 23.49 23.17 22.86 22.56 22.25 21.94

0.8

21.64 21.34 21.04 20.75 20.45 20.16 19.87 19.58 19.29 19.00

0.9

18.72 18.44 18.16 17.88 17.61 17.33 17.06 16.79 16.53 16.26

1.0

16.00 15.74 15.48 15.23 14.97 14.72 14.47 14.22 13.98 13.73

1.1

13.49 13.26 13.02 12.79 12.55 12.32 12.10 11.87 11.65 11.43

1.2

11.21 10.99 10.78 10.57 10.36 10.15 9.95 9.75 9.55 9.35

1.3

9.16 8.96 8.77 8.59 8.40 8.22 8.04 7.86 7.68 7.51

1.4

7.33 7.17 7.00 6.83 6.67 6.51 6.35 6.20 6.04 5.89

1.5

5.74 5.60 5.45 5.31 5.17 5.03 4.90 4.77 4.64 4.51

1.6

4.38 4.26 4.14 4.02 3.90 3.78 3.67 3.56 3.45 3.34

1.7

3.24 3.14 3.03 2.94 2.84 2.75 2.65 2.56 2.47 2.39

1.8

2.30 2.22 2.14 2.06 1.98 1.91 1.84 1.76 1.70 1.63

1.9

1.56 1.50 1.44 1.37 1.32 1.26 1.20 1.15 1.10 1.05

2.0

1.00 0.95 0.90 0.86 0.82 0.77 0.73 0.70 0.66 0.62

2.1

0.59 0.55 0.52 0.49 0.46 0.43 0.41 0.38 0.36 0.33

2.2

0.31 0.29 0.27 0.25 0.23 0.21 0.20 0.18 0.17 0.15

2.3

0.14 0.13 0.11 0.10 0.09 0.08 0.08 0.07 0.06 0.05

2.4

0.05 0.04 0.04 0.03 0.03 0.02 0.02 0.02 0.01 0.01

2.5

0.01 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00
1 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.


Table ST-10 Estimation of Lot Percent Defective for Sample Size 10

Q1

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09

0.0

50.00 49.62 49.23 48.85 48.46 48.08 47.70 47.31 46.93 46.54

0.1

46.16 45.78 45.40 45.01 44.63 44.25 43.87 43.49 43.11 42.73

0.2

42.35 41.97 41.60 41.22 40.84 40.47 40.09 39.72 39.34 38.97

0.3

38.60 38.23 37.86 37.49 37.12 36.75 36.38 36.02 35.65 35.29

0.4

34.93 34.57 34.21 33.85 33.49 33.13 32.78 32.42 32.07 31.72

0.5

31.37 31.02 30.67 30.32 29.98 29.64 29.29 28.95 28.61 28.28

0.6

27.94 27.60 27.27 26.94 26.61 26.28 25.96 25.63 25.31 24.99

0.7

24.67 24.35 24.03 23.72 23.41 23.10 22.79 22.48 22.18 21.87

0.8

21.57 21.27 20.98 20.68 20.39 20.10 19.81 19.52 19.23 18.95

0.9

18.67 18.39 18.11 17.84 17.56 17.29 17.03 16.76 16.49 16.23

1.0

15.97 15.72 15.46 15.21 14.96 14.71 14.46 14.22 13.97 13.73

1.1

13.50 13.26 13.03 12.80 12.57 12.34 12.12 11.90 11.68 11.46

1.2

11.24 11.03 10.82 10.61 10.41 10.21 10.00 9.81 9.61 9.42

1.3

9.22 9.03 8.85 8.66 8.48 8.30 8.12 7.95 7.77 7.60

1.4

7.44 7.27 7.10 6.94 6.78 6.63 6.47 6.32 6.17 6.02

1.5

5.87 5.73 5.59 5.45 5.31 5.18 5.05 4.92 4.79 4.66

1.6

4.54 4.41 4.30 4.18 4.06 3.95 3.84 3.73 3.62 3.52

1.7

3.41 3.31 3.21 3.11 3.02 2.93 2.83 2.74 2.66 2.57

1.8

2.49 2.40 2.32 2.25 2.17 2.09 2.02 1.95 1.88 1.81

1.9

1.75 1.68 1.62 1.56 1.50 1.44 1.38 1.33 1.27 1.22

2.0

1.17 1.12 1.07 1.03 0.98 0.94 0.90 0.86 0.82 0.78

2.1

0.74 0.71 0.67 0.64 0.61 0.58 0.55 0.52 0.49 0.46

2.2

0.44 0.41 0.39 0.37 0.34 0.32 0.30 0.29 0.27 0.25

2.3

0.23 0.22 0.20 0.19 0.18 0.16 0.15 0.14 0.13 0.12

2.4

0.11 0.10 0.09 0.08 0.08 0.07 0.06 0.06 0.05 0.05

2.5

0.04 0.04 0.03 0.03 0.03 0.02 0.02 0.02 0.01 0.01

2.6

0.01 0.01 0.01 0.01 0.01 0.00 0.00 0.00 0.00 0.00
1 Numbers in the body of the table are estimates of lot percent defective corresponding to specific values of Q, the Quality Index. For values of Q greater than or equal to zero, the estimate of percent defective is read directly from the table. For values of Q less than zero, the table value must be subtracted from 100.



Last Document Correction:
December 14, 2007