The data provided herein are distributed subject to the following conditions and restrictions:
Subject Data Layers
For all data contained herein, (NJDEP) makes no representations of any kind, including, but not limited to, the warranties of merchantability or fitness for a particular use, nor are any such warranties to be implied with respect to the digital data layers furnished hereunder. NJDEP assumes no responsibility to maintain them in any manner or form.
II. Terms of Agreement
1. Digital data received from the NJDEP are to be used solely for internal purposes in the conduct of daily affairs.
2. The data are provided, as is, without warranty of any kind and the user is responsible for understanding the accuracy limitations of all digital data layers provided herein, as documented in the accompanying Data Dictionary and Readme files. Any reproduction or manipulation of the above data must ensure that the coordinate reference system remains intact.
3. Digital data received from the NJDEP may not be reproduced or redistributed for use by anyone without first obtaining written permission from the NJDEP. This clause is not intended to restrict distribution of printed mapped information produced from the digital data.
4. Any maps, publications, reports, or other documents produced as a result of this project that utilize NJDEP digital data will credit the NJDEP's Geographic Information System (GIS) as the source of the data with the following credit/disclaimer:
"This (map/publication/report) was developed using New Jersey Department of Environmental Protection Geographic Information System digital data, but this secondary product has not been verified by NJDEP and is not state-authorized."
5. Users shall require any independent contractor, hired to undertake work that will utilize digital data obtained from the NJDEP, to agree not to use, reproduce, or redistribute NJDEP GIS data for any purpose other than the specified contractual work. All copies of NJDEP GIS data utilized by an independent contractor will be required to be returned to the original user at the close of such contractual work.
Users hereby agree to abide by the use and reproduction conditions specified above and agree to hold any independent contractor to the same terms. By using data provided herein, the user acknowledges that terms and conditions have been read and that the user is bound by these criteria.
During Phase I data compilation, a random sample of 10% of the entries in the system were visually verified against the compilation source data (large-scale USGS topographic maps) to ensure an accuracy rate of at least 95%. Subsequent data compilation and input processes ensure accuracy with programmed validation checks for format and content, visual examination, and spot checks of data.
The aforementioned test is documented as part of the GNIS metadata record located on the web at: <http://geonames.usgs.gov/GNIS.html>
During Phase I data compilation, a random sample of 10% of the entries in the system were visually verified against the compilation source data (large-scale USGS topographic maps) to ensure logical consistency of locative references (geographic coordinates, topographic map, and county. Subsequent data compilation and input processes include programmed validation checks for logical consistency, visual examination, and spot checks of data.
The aforementioned test is documented as part of the GNIS metadata record located on the web at: <http://geonames.usgs.gov/GNIS.html>